How to use
The DC-3V-RS is a three-channel DC voltage data logger that needs its 3 Voltage leads connected to your supply/equipment. Setup the Logger using the Electrosoft software, then fit it to the point that you're going to measure.
This logger is designed to be installed by a competent person (generally an electrician or engineer), and if isolated test points are available can be fitted without power interruption. Once you're set up, just press the Start button to start logging! The onboard indicator will flash Green when logging.
When the logger's finished recording (or you've captured enough data!) just disconnect from supply, hook it up to your PC and download the information. Electrosoft will let you view the data immediately on-screen and save or export for later analysis.
The DC-3V-RS is ideal for monitoring and recording one, two or three channels of DC voltages from 1Vdc to 300Vdc, with selectable range 0.5V to 60V and 1V to 300V, for example from batteries, circuit breaker trip batteries, charging circuits, power supplies, photovoltaic (PV) cells, DC motor circuits, DC Generators, DC telecoms circuits.
The advantage of the Electrocorder products over most others is that our data loggers constantly sample information (recording the Min, Max and Average) over the set period, many other products only take 'snap shots' of what is going on and can miss 99.9% of the data that is critical to your analysis.
Kit includes 60V/300V data logger, unfused voltage input leads, USB lead, 12Vdc PSU, Electrosoft software and carry case.
|User Instructions (English)
Determining product order codes:
To specify your Electrocorder select various codes and enter into the boxes in order to create an accurate product code. For example: DC-3V-RS-IP43-KIT.