How to use
Logger is hired by the week - for one week hire, enter '1' into the order quantity box.
You are responsible for returning the logger to use after the hire period has finished, using your own courier.
The CT-2VA is a single-phase voltage and current data logger that uses a clip-on CT (current transformer) and plug to connect to the mains supply/equipment you wish to monitor. Setup the Logger using the Electrosoft software, then fit it to the distribution board or other point that you're going to measure.
What you get:-
This logger is designed to be installed by a competent person (generally an electrician or engineer), and if isolated test points or a mains socket are available can be fitted without power interruption. Once you're set up, it'll start logging automatically as soon as voltage is detected! The indicator will flash Green when logging.
When the logger's finished recording (or you've captured enough data!) just disconnect from supply, hook it up to your PC and download the information. Electrosoft will let you view the data immediately on-screen and save or export for later analysis.
The CT-2VA data logger is used by power distribution companies, facilities management, electrical or site services and maintenance engineers to monitor both voltage and current variations helping them to diagnose any related issues, or to gather data perhaps to make representations to their power supplier. As the product records both voltage and current, users can determine if low voltage is related to high current demands on site, or if the low voltage is being supplied to the site.
|User Instructions (English)|
Determining product order codes:
To specify your Electrocorder select various codes and enter into the boxes in order to create an accurate product code. For example: CT-2VA-5H-UK-IP65-SET.